Delta Connection In a 3 Phase System

In Delta (Δ) or Mesh connection, the finished terminal of one winding is connected to start terminal of the other phase and so on which gives a closed circuit. The three-line conductors are run from the three junctions of the mesh called Line Conductors.

The connection in delta form is shown in the figure below:



To obtain the delta connections, a2 is connected with b1, b2 is connected with c1 and c2 is connected with a1 as shown in the above figure. The three conductors R, Y and B are running from the three junctions known as Line Conductors.

The current flowing through each phase is called Phase Current (Iph), and the current flowing through each line conductor is called Line Current (IL).

The voltage across each phase is called Phase Voltage (Eph), and the voltage across two line conductors is called Line Voltage (EL).

Relation Between Phase Voltage and Line Voltage in Delta Connection

To understand the relationship between the phase voltage and line voltage in the delta connection, consider figure A shown below:

delta-connection-figure-2It is clear from the figure that the voltage across terminals 1 and 2 is the same as across the terminals R and Y. Therefore,

delta connection eq1


delta connection eq2

: the phase voltages are

delta connection eq3

The line voltages are:

delta connection eq4

Hence, in delta connection line voltage is equal to phase voltage.

Relation Between Phase Current and Line Current in Delta Connection

As in the balanced system the three-phase current I12, I23 and I31 are equal in magnitude but are displaced from one another by 120° electrical.

The phasor diagram is shown below:


delta connection eq5

If we look at figure A, it is seen that the current is divided at every junction 1, 2 and 3.

Applying Kirchhoff’s Law at junction 1,

The Incoming currents are equal to outgoing currents.

delta connection eq6

And their vector difference will be given as:

delta connection eq

The vector I12 is reversed and is added in the vector I31 to get the vector sum of I31 and –I12 as shown above in the phasor diagram. Therefore,

delta connection eq7

As we know, IR = IL, therefore,

delta connection eq8


delta connection eq9

Hence, in delta connection line current is root three times of phase current.

delta connection eq10
This is all about Delta Connection In a 3 Phase System.

5 thoughts on “Delta Connection In a 3 Phase System”

Leave a Comment

Your email address will not be published. Required fields are marked *